OMP Hobby 60" 70E Edge 540 Kevlar Reinforced Balsa 3D Airplane ARF
Sale!

OMP Hobby 60″ 70E Edge 540 Kevlar Reinforced Balsa 3D Airplane ARF

Original price was: $395.00.Current price is: $79.00.

Color:

SKU: 6082205876412 Category:

Description

Make sure to select 550KV in the above motor KV drop menu. Other KVs are not recommended for this airplane.

Recommended CG: Carbon spar going through the fuselage

This is an oversized box and does not qualify for free shipping. Flat rate shipping applied at checkout.

Parameter Specification

Item: OMPHOBBY 60”EDGE 540 Color: Green▢ Red▢ Yellow▢ Orange▢ 
Wing Span: 1524mm(60in)  Full Length: 1500mm(59in)
Flight Weight:  2.75~2.85KG  The Center of Gravity (CG): Approx.86-95mm 
Wing Area: 42.32d㎡ Wing Load:  64.98~67.34g/d㎡ 
Wing Angle of Incidence:  0°  Motor Thrust Angles: Down 0° & Right 2.8° 
Pack Dimension: 130*44*22 (L*H*W)cm Gross Weight: 10KG 
Servo: 13~15 Kg.cm*4 (Aileron*2,Elevator*1, Rudder*1) , Servo Arm: 1.25″ 25T Servo Arm
Electric Power (Recommended):

Option 1: Motor: X4120 550KV  ESC: 80-100A  Propeller: Eolo 15×8 Lipos: 6s 3300mah-4000mah

Option2: Motor: 4125 515KV  Esc 100A Propeller: Eolo 16×8 Lipos: 6s 3300mah-4000mah

Recommended Settings of Dual Rates and Exponentials of Control Surfaces

Rate EXP Direction Throw
Aileron High 35~40% Up 36~39°
Low 40~45% Down 20~26°
Elevator High 38~45% Up 45~53° 
Low 45~55% Down 30~35° 
Rudder High 38~45% Up 42~50°
Low 45~55% Down 28~32°

Factory recommends SunnySky X4120 V3 550KV motor for best agility and power.

100 Amp ESC– https:///products/ztw-mantis-120a-high-voltage-esc-opto?variant=30274465103958

Servos — 35mm L X 15mm W x 29.2mm H, such as Savox 1250, or MKS hv737, or Hitec 7245.

Additional information

mycustom

Color#Green, Yellow, Orange, Red

Reviews

There are no reviews yet.

Be the first to review “OMP Hobby 60″ 70E Edge 540 Kevlar Reinforced Balsa 3D Airplane ARF”

Your email address will not be published. Required fields are marked *