Happymodel Crux3 1S 3 Inch Toothpick FPV Racing Drone BNF (ELRS / FRSKY / DSM Receiver)

Description

Specifications:

• Motor Mode: EX1202.5 KV11500
• Configu-ration:9N12P
• Stator Diamter:12mm
• Stator Length:2.5mm
• Shaft Diameter: 1.5mm
• Motor Dimension(Dia.*Len): 14mm*14.5mm
• Weight(g):4.4g
• No.of Cells(Lipo):1S
• Propellers Gemfan 75mm
• Center Thickness:5mm
• Prop Diameter:75mm
• Center Hole diameter:1.5mm
• Pitch:0.9in
• Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Original whoop size compatible
• Power supply: 1S battery input (DC 2.9V-4.35V)
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G VTX
• Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controller
• Firmware target: CRAZYBEEF4SX1280
• Onboard 4in1 ESC MCU upgraded to EFM8BB21
• Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: O_H_5_REV16_7.HEX
• Default protocol: DSHOT300
• Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
• RF Frequency: 2.4GHzAntenna : SMD antenna
• Telemetry output Power: <12dBmReceiver protocol to flight controller: CRSFCould bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest
• Onboard 5.8g VTX Output power: 25mw~200mw switchable
• Frequency: 40CH
• Input voltage: 3.3V 5.5V
• Current consumption: 300mA(type)
• Frequency: 5.8GHz 5bands 40 channels
• With Race bandSmartaudio ready
• Caddx ANT 1200tvl camera Image Sensor: 1/3³ CMOS Sensor
• Horizontal Resolution: 1200 TVL
• TV System: NTSC or PAL
• IMAGE: 16:9 or 4:3
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio : >52dB (AGC OFF)
• Video Output: CVBS
• Lens: 1.8mm
• Min. Illumination: [email protected]
• Auto Gain Control: YES
• BLC: YES
• WDR: Global WDR
• DNR: 3D DNR
• Dimensions: 14*14mm(with bracket to 19*19mm)
• Wide Power Input: DC 3.7-18V
• Work Temperature: -20 Degrees~+60 Degrees
• Weight: 2g (N.W.)

Package Contents:

• 1x Crux3 Frame and canopy
• 1x ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver
• 4x appymodel EX1202.5 KV11500 brushless motor
• 1x Gemfan 75mm bi-blade Propellers(4cw+4ccw)
• 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
• 1x 5.8G 25mw~200mw 40ch vtx (Flight controller built-in)
• 1x Screw Driver
• 1x Propeller disassemble tool
• 1x 3D Printed Camera Holder
• Happymodel Handbag