Detrum iStoneAll V3 6-Axis Gyro Stabilizer & 3-in-1 Program Card Combo

Description

Detrum iStoneAll V3 6-Axis Gyro Stabilizer & 3-in-1 Program Card Combo – DTM-1025

The Detrum iStone V3 combines V2 and Vector technologies into a single advanced solution. It’s a high-performance 6-axis gyro stabilizer designed for RC aircraft. Featuring advanced flight stabilization, runway correction (ground steering assist), and broad receiver compatibility, it significantly enhances flight stability, control precision, and takeoff/landing performance.

Built around a 32-bit ARM processor and MEMS 6-axis sensor, the iStone V3 delivers real-time corrections across roll, pitch, and yaw axes—making it ideal for both beginner pilots and experienced flyers seeking smoother, more controlled flight.

Compatible with standard fixed-wing, flying wing (delta), and V-tail aircraft, the iStone V3 is a versatile upgrade for nearly any RC airplane setup.

Key Features

Advanced 6-Axis Flight Stabilization

• High-precision MEMS gyro + accelerometer
• Real-time correction on roll, pitch, and yaw axes
• Improves stability, tracking, and wind resistance

Integrated Runway Correction (Ground Steering Assist) Tricycle Gear Optimized

• Automatically maintains directional control during landing and takeoff
• Reduces veering and improves runway tracking
• Dedicated wheel output for nose wheel servo

Four Intelligent Flight Modes

Switch easily via a 3-position transmitter switch:

• Gyro Off Mode – Direct control for setup and testing
• Normal Mode – Stabilized flight with gyro assistance
• Safe Mode (Auto-Level) – Keeps aircraft level; ideal for beginners and recovery
• 3D Lock Mode (Aerobatic) – Locks aircraft attitude when sticks are centered

Wide Receiver Compatibility

Supports multiple receiver types:

• PWM receivers
• S.Bus receivers
• DSM receivers

Flexible Aircraft Support

• Conventional fixed-wing aircraft
• Flying wing (Delta) with elevon mixing
• V-tail aircraft with integrated mixing

Fully Programmable via Programming Card

• Mounting orientation (4 directions)
• Wing type selection
• Flight mode assignment
• Roll / Pitch offset (level trim)
• Gain tuning (angle gain & rate gain)

The 3-in-1 program card sets the programmable items for ESCs and stabilizers and measures the voltage for the Li-Po battery. Its friendly LCD interface makes programming and measurement easy.

Please click here for Detrum 3-in-1 Program Card Manual.